微型二氧化碳監測儀 End Tidal CO2: Micro-Capnograph

Columbus Instruments Micro-CapnoGraph CI289 monitor has the most outstanding features of any monitor available. Capabilities include microprocessor control, waveform display, digital calibration, multiple alarms, and more.

The CI289 has many advanced features which make it an excellent choice for both intubated or non-intubated small animals like rats and mice. At the heart of this system is the internal fast response CO2\N2O gas analyzer and state of the art pressure and pneumatics control system which utilizes a very low sample flow rate (5 mL/minute to 20 mL/minute).

The CI289 uses three microprocessors to distribute the processing requirements of its unique features. The CI289 interfaces via USB to a personal computer (PC).

The CI289 is unique in its capability of providing accurate measurements of CO2 and N2O concentration and Respiration rate at very low sample flow rate with a standard Non-dispersive Infrared (NDIR) gas sensor. The CI289 operates at low pressure, using a heavy-duty air pump and digital closed loop pressure control system. This design maintains the sample cell pressure and sample flow rate constant at the desired reference pressure. The CI289 draws a sample of gas through the sample cell. It uses an Infrared light source, optical band pass filter and detector to measure the amount of CO2 in the sample. The sample can be read as a partial pressure in mmHg or as a volume in percentage and the amount of N2O as a volume in percentage.

The continuous waveform is used to calculate the respiration rate in breath per minute (BPM) and to find the End tidal value of CO2 (ETCO2) and the Base line value of CO2 (BLCO2) on a breath-by-breath basis. ETCO2, BLCO2 and RESR are displayed as an average of 1, 4 or 8 (user selectable) breaths updated every breath. The Inspired N2O (INSP N2O) is displayed continuously.

Ideal for Rats and Mice
Utilizes low air sample flow rates (5 cc 10cc, or 20 cc/min.)
Based on low pressure-high velocity principle for analyzing sampled gas with IR gas sensor technology
Determines respiration rate by counting the period from the wave pattern of CO2 concentration
Capable of measuring CO2 concentration in expired air (end-tidal CO2) of small (mice, rats) or large subjects

CO2 Measurement: Non - Dispersive IR absorption
Measurement Range: 0 - 80mmHg or 0 - 10%
Accuracy: 2.5 mmHg or 0.3%
Resolution: 0.1mmHg or 0.01%
Calibration: Digital Zero and Span Calibration
Response Time: 75msec @ 20mL/min to 90% of value

N2O Measurement: Non - Dispersive IR absorption
Measurement Range: 0 - 100%
Accuracy: 3%
Resolution: 0.1%
Calibration: Digital Zero and Span Calibration
Response Time: 150msec @ 20mL/min to 90% of value

ETCO2 (End Tidal CO2) & BLCO2 (Base Line CO2): Display 4 digits seven segments LED
Averaging User-selectable: 1 - Breath (no average), 4 - Breath or 8-Breath average updated every breath.

Respiration Rate (RR): Display 3 digits seven segments LED
Averaging User-selectable: 1 - Breath (no average), 4 - Breath or 8-Breath average updated every breath.
Range 10 - 115 BPM , Accuracy 2 BPM

Flow Rate: User-selectable: 20mL/min@115 BPM , 10mL/min@100BPM , 5mL/min @ 50BPM

Resolution CO2 in mmHg: 0.06v/mmHg
CO2 in %: 0.5v/%
N2O: 0.05v/%
Alarms: Settings Multiple for ETCO2, INSP N2O and RR
Method User-selectable: Flash or Flash & Sound
Indicators Front panel Green LEDs: the alarm is
Enabled and its method F&S
Front panel Flashing Red LEDs
Adjustable Volume (HI, LO, OFF)
Sound alarm. (Alarm Limit Range User-selectable: Maximum and/or Minimum limits.)
Chart Recorder Calibration User-selectable: 5v Full Scale (FS) or 0v Zero Scale (ZS) signal.
Chart Recorder Start/Stop signal.
Power Requirements: 120-240 Volts AC, 50/60HZ

Dimensions: 7"(17.78cm) H 17"(43.18cm) W 13"(33cm) D
Weight: 10 Kg.

原廠連結