PRODUCT
首頁

產品資訊

PRODUCT
首頁

產品資訊

W2100微電極陣列無線電生理訊號記錄系統

產品型號:
廠牌名稱: Multichannel Systems
Multichannel Systems W2100 wireless systems 為一套完整的活體電生理記錄解決方案,包含了記錄主機與動物頭部放大器,可選購光遺傳學擴充設備。
您亦可從既有的MEA2100系統擴充成W2100系統

產品特點

The wireless in vivo systems are the all-in-one solution for amplifying, recording, and analyzing in vivo data from 4, 8, 16 or 32 channels. 

The system includes everything you need: Small-sized headstage with integrated A/D converter, digitized transmission, powerful receiver, batteries, as well as a powerful software package.

The most advantageous feature of the Wireless-Systems is the amplification and digitalization of the data on the headstage itself. This way, only digital data is sent to the receiver, which ensures that your data is not diluted or distorted.

With its excellent signal-to-noise ratio, it is the ideal solution for spikes, LFP, EEG, ECG, and ECoG. Additional inputs to the receiver allow the synchronization of the data with external devices.

Synchronized video to data recording is possible with the W2100-Video-System.

W2100-System_Overview

 

MCS-IFB

As part of the system, the MCS-IFB 3.0 Multiboot is a new interface board generation which is able to receive data from a MEA2100(-Mini)-Headstage, a Multiwell-MEA-Headstage, a CMOS-MEA5000-Headstage, a MEA2100-Beta-Screen-Headstage, a MCS-SCU or a W2100-Receiver. This makes cost-effective combinations with only one interface board and multiple recording systems possible. You can establish for example your experiments on 60, 120, or 256 electrodes with the MEA2100-System, then add the Multiwell-MEA-Headstage and start high-throughput screening. It's also possible to use the same interface board for in vitro MEA experiments and tethered / wireless in vivorecordings. This leaves you with even more flexibility in switching between possible configurations for your specific research needs.

Key features:

  • Real-time signal detection and feedback*
  • Freely programmable DSP*
  • Multiple inputs/outputs, including digital, analog, and audio
  • SuperSpeed USB 3.0 ports

* applicable for MEA2100(-Mini), ME2100, and W2100

MCS-InterfaceBoard-3.0-Multiboot

產品規格

Wireless data acquisition system with additional output for analog data.
Complete with receiver, MCS-interface board 3.0 multiboot, and software package. The system can be connected to any computer or laptop via USB 3.0 High Speed and be controlled from Multi Channel Suite or custom programs. Can be operated with all W2100-headstages. 68-pin connector provides access to analog data for streaming into third party data acquisition.
Please note: The interface board is initially restricted to run the W2100-System only. For full functionality of the multiboot interface board an upgrade can be ordered separately. (IFB 3.0 Multiboot Upgrade)

  • 1 x Receiver (W2100-RE-AO):
    - Dimensions (W x D x H): 250 x 83 x 25 mm
    - 5 antennas for signal reception
    - Can receive signals from up to 4 headstages (reduced sampling rate)
    - 68-pin connector for accessing analog data
  • 1 x MCS interface board 3.0 multiboot (MCS-IFB 3.0 Multiboot):
    Includes various in-/outputs:
    - 2x eSATA: Connetion for 2 receivers (W2100-RE)
    - 4x Digital Out: Interface for output bit 0 - 3 of the 16-bit digital input / output channels (Lemo connector)
    - 4x Digital In for synchronization with other instruments (bit 0 – 3) (Lemo connector)
    - Digital IN / OUT: Interface for 16-bit digital input / output channels. Generates or accepts TTL-pulses
    - 1x Stereo Out: Possibility to export 2 channels (e.g on an oscilloscope or headphones making the signals audible)
    - 2x Analog IN: Interface for 2 additional analog inputs (channel 1 and 2) (Lemo connector)
    - Analog IN: 8-channel Analog input (channel 1-8)
    - 1x Ground
    - 1x Universal Serial Bus High Speed
    - External power supply: 100-240 V input voltage range
  • Data acquisition and analysis software Multi Channel Suite:
    - Including a 2 years maintenance package (software updates and support)
  • Accessories
    - Charging device for headstage battery, USB-powered
    - Signal generator
    - Infra-red flashlight for switching on the headstage
    - Cable assembly
    - CD with user manuals and software

Technical specifications as specified in the data sheet unless noted otherwise in the order.

Please note: Headstage needs to be ordered separately.

應用領域

詢價表單

填寫完成

您可以繼續瀏覽或轉移至產品列表!

回產品列表